## High frequency Power Inductor Design: DC & AC

Detailed design steps for both AC and DC HF power Inductors is explained. The main objective of the video is to answer following two quest...

## Lecture 10 : Modelling of Practical Transformer - III

Concepts Covered:   Modelling of Leakage Inductance

## Lecture 09 : Modelling of Practical Transformer - II

Concepts Covered:   Modeling of Coil Resistance

## Lecture 08 : Modelling of Practical Transformer - I

Concepts Covered:    Modelling of Magnetizing Current

## Lecture-5: Load Equalization, Characteristics of DC Motor

Load equalization for pulsating load torque is discussed. The characteristics of separately excited DC motor are reviewed.

## Lecture-3: Equivalent Drive Parameters, Friction Components, Nature of Load Torque

The lecture discusses the equivalent drive parameters when motor and load are coupled by gear/pulley. Friction components and various load ...

## Lecture-2: Dynamics of Electric Drives, Four Quadrant Operation, Equivalent Drive Parameters

The lecture discusses the dynamics of electric drives and 4 quadrant operation. Equivalent drive parameters are introduced.

## Lecture-1: Introduction to Electric Drives

The present lecture discusses about various components of electric drives along with the main advantages of electric drives

## Lecture 6 : Temperature Distribution in Radial Systems

Concepts Covered: Resistance to flow in radial systems, concept of critical thickness of insulation Key Word: Resistance in radial system...

## Lecture 4: BJT Operation in active mode Circuit symbol and conventions-I

Outline  NPN Transistor In Forward Active Mode operation  PNP Transistor In Forward Active Mode operation  Common-emitter configura...

## Lecture 2: Bipolar Junction Transistor : Modes of operation - I

Modes of Operation  Depending on bias condition (forward or reverse) of pn junctions,  different modes of operation of BJT.  Active m...